Series 100 Pulsators Hung Upside Down.

Used for Cooling & Humidity Control in Greenhouses.

PIP Pulsators series 100 operating at a flow of 4 l/h is used for humidity control and for cooling in greenhouses since 1993. The Pulsator can operate with a spinner or with a mister.

Advantages:

• Because the Pulsators operate at very low flow and at very low application rate, the system can operate continuously many hours, without flooding the greenhouse.
• Since each PIP Pulsator is also a preset normally closed valve, at the end of each irrigation cycle all the pipes remains full of water (and pressurized)
• All the Pulsators in the greenhouse, regardless of its size, can operate simultaneously and be controlledcontrolled by using only one main valve (a timer or a thermostat).
• The water supply system which includes: the pump, the filter system, the pipes and the fitting are relatively small and much less expensive to purchase, install and maintain. All the Pulsators in a greenhouse, regardless of its size, can be controlled by using only one main valve (or a thermostat).

The PIP Pulsators are used for this application when the Pulsators are connected to a flexible lateral. Pulsators series 500 can be used for the same applications when using PVC laterals.

Click here for more information